cts ? 6 part number*** size pin fin configuration thermal resistance case to ambient* c/watts (w) (l) (h) t p g fin ma trix natural convection** forced convection @ 400 lfpm bdn09-3cb/a01 0.91 0.91 .355 .09 .069 .072 7x7 26.9 9.6 bdn09-6cb/a01 .605 .10 .132 .128 4x4 24.5 7.7 bdn10-3cb/a01 1.01 1.01 .355 .09 .083 .072 7x7 26.4 8.0 bdn10-5cb/a01 .555 .10 .111 .114 5x5 20.8 6.3 bdn11-3cb/a01 1.11 1.11 .355 .09 .076 .072 8x8 20.9 7.2 bdn11-6cb/a01 .605 .10 .119 .128 5x5 18.5 5.7 bdn12-3cb/a01 1.21 1.21 .355 .09 .060 .081 9x9 19.6 6.8 bdn12-5cb/a01 .555 .10 .105 .114 6x6 16.5 5.2 bdn13-3cb/a01 1.31 1.31 .355 .09 .074 .081 9x9 16.1 6.0 bdn13-5cb/a01 .555 .10 .125 .114 6x6 14.9 4.7 bdn14-3cb/a01 1.41 1.41 .355 .09 .067 .081 10x10 16.2 5.6 bdn14-6cb/a01 .605 .10 .128 .128 6x6 13.1 4.2 bdn15-3cb/a01 1.51 1.51 .355 .09 .062 .081 11x11 15.1 4.5 bdn15-5cb/a01 .555 .10 .118 .114 7x7 11.9 3.8 bdn16-3cb/a01 bdn16-6cb/a01 1.61 1.61 .355 .09 .072 .081 11x11 13.5 4.5 .605 .10 .119 .128 7x7 10.6 3.5 bdn17-3cb/a01 1.71 1.71 .355 .09 .065 .072 13x13 11.5 3.8 bdn18-3cb/a01 1.81 1.81 .355 .09 .072 .072 13x13 10.8 3.5 bdn18-6cb/a01 .605 .10 .128 .114 8x8 8.1 2.8 bdn19-3cb/a01 1.91 1.91 .355 .09 .069 .072 14x14 9.9 2.9 bdn21-3cb/a01 2.11 2.11 .355 .09 .064 .072 16x16 8.5 2.6 w0.01 with pre-applied adhesive, just peel off the release liner and press onto the component reduces assembly costs; no more messy adhesives or greases required excellent mechanical bond thermally optimized pin fin omnidirectional adhesive shear strength at 100c is 36psi (a one inch square heat sink would require a 36lb. force to remove heat sink) applicable for bga, pga, plcc, and qfp packages h0.015 l0.01 g0.01 p0.01 t0.01 notes: * thermal resistance of adhesive tape is included. ** thermal resistance values based on power density of 3 watts/in 2 *** part numbers listed for standard black anodized heat sinks with cts adhesive tapes. all dimensions are in inches.
|
